Safety Notice
Table Of Contents
- 1 – Introduction
- 2 – Getting Started
- 3 – Installation
- 4 – Mounting
- 5 – Displayed Information
- 6 – Trouble Shooting Information
- Appendix A – Applications overview
- Appendix B – System Specifications
- Appendix C – Safety Hints
Spotwave Wireless Inc.
5
2.2 Unpacking and inspecting
Physically inspect the box for shipping damage before unpacking the
SpotCell 100.
1.
Remove the SpotCell 100 components from the box.
2.
Remove all packing material from the Directional Donor Unit
(DDU) and the Subscriber Coverage Unit (SCU). Save the
packaging in case the SpotCell 100 is ever stored or shipped to
SpotWave for service.
3.
Check the contents of the package to make sure you have received
everything ordered and verify that the mounting kit contains all the
listed parts.
4.
Check the DDU and SCU for shipping damage. Pay particular
attention to the unit’s outer shell casing.