Brochure

Rev: 10/2019
www.spotsee.io
WarmMark Use Instructions
1. All WarmMark breach window(s) should be white prior to arming the device.
2. Before arming, the WarmMark indicator should be placed in an environment at least 5°C (9°F) below
the WarmMark’s acvaon threshold temperature for a minimum of 30 minutes.
3. To arm the WarmMark indicator, fold up and pull out the indicator’s acvaon tab unl the tab and
barrier lm have been completely removed.
4. If using a WarmMark indicator with a threshold temperature below the ambient temperature,
immediately place the indicator in the environment to be monitored to avoid early acvaon.
5. Remove the adhesive liner from the WarmMark and adhere the indicator to a clean, dry surface.
a. The WarmMark should be located where it will be visible to the receiver of the monitored shipment.
b. The WarmMark can be adhered directly to the product being monitored or located inside the packaging.
*Run out mes are based on a constant temperature 2°C above the indicator threshold. Exposure to higher temperatures will result in faster run out.
WarmMark
®
Temperature Indicators
Long Run Indicators
Line 1 Line 2 Line 3 Line 4 Line 5
10°C / 50°F 12 hours 30 hours 60 hours 110 hours 168 hours
31°C /88°F 12 hours 30 hours 60 hours 110 hours 168 hours
WarmMark Key Specifications
Temperature Accuracy
± 1°C / ± 2°F
Storage Condions
Store below the response temperature and below 55% relave humidity for opmal shelf life.
Shelf Life
2 years from date of sale
Available Temperature Run Out Times*
3 Window Indicators Brief Moderate Prolonged
-18°C / 0°F 1 hr 3 hrs 12 hrs
0°C / 32°F
8°C / 46°F
10°C / 50°F
20°C / 68°F
2 hours 12 hours 48 hours
5°C / 41°F
25°C / 77°F
30°C / 86°F
37°C / 99°F
30 minutes 2 hours 8 hours
Single Window Indicators
8°C / 46°F 8 hrs
8°C / 46°F 12 hrs
25°C / 77°F 8 hrs
Duo Indicator
Window 1 Window 2 Window 3 Window 4
10°C / 50°F 3 days 8 days 14 days
34°C /93°F within 20 minutes