Brochure

ManualsBrandsSpotSee ManualsDamage IndicatorsSpotSee ShockWatch® 2 Serialized Framed Impact Indicators, 50G Range, Red, 50/Box

SpotSee

Impact Indicator Technical Data

www.spotsee.io 1

SpotSee

impact indicators are innovave soluons for

detecng mishandling of sensive products. Simply

mount the indicator on the outside of your package to

being monitoring. When the indicators turn red, you

know if your product may have been damaged as a

result of mishandling. The ShockDot and ShockWatch

Label are both live indicators while the ShockWatch 2

is a eld armable indicator.

ShockDot / ShockWatch Label Key Specifications ....................................................................................................................2

ShockWatch 2 Key Specifications .............................................................................................................................................2

Product Selection......................................................................................................................................................................3

Mounting Best Practices ...........................................................................................................................................................4

ShockWatch Impact Indicator Activation Basics ......................................................................................................................5

ShockDot Response Curves ......................................................................................................................................................6

ShockWatch 2 Response Curves ...............................................................................................................................................8

ShockWatch 2 Response Equations ........................................................................................................................................10

ShockWatch Label/Clip/Tube Response Curves .....................................................................................................................11

ShockWatch Label/Clip/Tube Response Equations ................................................................................................................13

Accessories & Related Products .............................................................................................................................................14

Quality .....................................................................................................................................................................................14

Technical Support ...................................................................................................................................................................14

Warranty .................................................................................................................................................................................14

CONTENTS

Summary of content (13 pages)

PAGE 1
SpotSee Impact Indicator Technical Data SpotSee® impact indicators are innovative solutions for detecting mishandling of sensitive products. Simply mount the indicator on the outside of your package to being monitoring. When the indicators turn red, you know if your product may have been damaged as a result of mishandling. The ShockDot and ShockWatch® Label are both live indicators while the ShockWatch 2 is a field armable indicator. CONTENTS ShockDot / ShockWatch Label Key Specifications..................
PAGE 2
SpotSee Impact Indicator Technical Data SHOCKDOT/SHOCKWATCH LABEL KEY SPECIFICATIONS KEY SPECIFICATIONS Indication Type Visual, irreversible white to red color change Activation Method Live Operating Temperature Range -25°C to 60°C / -13°F to 140°F Storage Conditions 20°C / 68°F, 1 ATM 0 - 99% RH Non-Condensing Impact Sensitivities 25G, 37G, 50G, 75G, 100G Impact Duration 0.
PAGE 3
SpotSee Impact Indicator Technical Data PRODUCT SELECTION Product Selection SpotSee impact indicators should be used when monitoring products that are sensitive and must be handled with care. There to select select aanShockWatch impact indicator sensitivity: size and weight. There are are two two things things you you need need to to know know to impact indicatorshipment sensitivity: shipment size The selection guide shouldThe always be used as ashould startingalways point be only.
PAGE 4
SpotSee Impact Indicator Technical Data ShockWatch 2 MOUNTING BEST PRACTICES Mount Impact Indicators in the lower third of the package/pallet as close to the edge as possible. Avoid the center of the package because the mounting locations should be structurally sound. If the package is twice as long as it is wide, use two impact indicators. Place a second indicator in the same position on the opposite side of the package.
PAGE 5
SpotSee Impact Indicator Technical Data IMPACT INDICATOR ACTIVATION BASICS Two components comprise an impact – amplitude of acceleration (G) and duration of impact (msec). These components are illustrated in the graph below. The area under the curve represents the change in velocity (Δv). ShockWatch impact indicator shock response curves are based on a half-sine shock pulse (shown above).
PAGE 6
SpotSee Impact Indicator Technical Data SHOCKDOT RESPONSE CURVES ShockDot G-Level vs. Duration (ms) 0.5 to 50 msec range Activation Occurs +/- 15% of the Nominal Activation Value www.spotsee.
PAGE 7
SpotSee Impact Indicator Technical Data ShockDot G-Level vs. Duration (ms) 0.5 to 5 msec range Activation Occurs +/- 15% of the Nominal Activation Value Note: The ShockDot is not affected by mounting orientation. The device is not responsive to impacts directly to the face of the product. www.spotsee.
PAGE 8
SpotSee Impact Indicator Technical Data SHOCKWATCH 2 – RESPONSE CURVES ShockWatch 2 G-Level vs. Duration (ms) 0.5 to 5ms Activation Occurs +/- 15% of the Nominal Activation Value www.spotsee.
PAGE 9
SpotSee Impact Indicator Technical Data ShockWatch 2 G-Level vs. Duration (ms) 0.5 to 50 msec range Activation Occurs +/- 15% of the Nominal Activation Value www.spotsee.
PAGE 10
SpotSee Impact Indicator Technical Data SHOCKWATCH 2 RESPONSE EQUATIONS All ShockWatch 2 impact indicator curves are based on the indicator being subjected to a flat drop. The ShockWatch 2’s response generally follows the equations below: PRODUCT EQUATION ShockWatch 2 – 5G G=(116/t-1.22) + 6.26 ShockWatch 2 – 10G G=(145/t-1.25) + 9.37 ShockWatch 2 – 15G G=(190/t-1.25) + 15.12 ShockWatch 2 – 25G G=(245/t-1.25) + 23 ShockWatch 2 – 37G G=(250/t)-1.3 + 45.7 ShockWatch 2 – 50G G=(285/t)-1.25 + 50.
PAGE 11
SpotSee Impact Indicator Technical Data SHOCKWATCH LABEL RESPONSE CURVES Label/Clip/Tube G-Level vs. Duration (ms) 0.5 to 5ms Activation Occurs +/- 15% of the Nominal Activation Value www.spotsee.
PAGE 12
SpotSee Impact Indicator Technical Data Label/Clip/Tube G-Level vs. Duration (ms) 0.5 to 5 msec range Activation Occurs +/- 15% of the Nominal Activation Value www.spotsee.
PAGE 13
SpotSee Impact Indicator Technical Data SHOCKWATCH LABEL RESPONSE EQUATIONS Activation curves for the ShockWatch Label, Clip, and Tube are based on the indicator receiving an impact at a 45° angle. The response curves generally follow the equations below. PRODUCT EQUATION Type 30 Label/Clip/Tube G=367.2/t + 102.5 Type 35 Label/Clip/Tube G=299.8/t + 81.5 Type 47 Label/Clip/Tube G=233.1/t + 52.7 Type 55 Label/Clip/Tube G=215.0/t + 40 Type 65 Label/Clip/Tube G=201.1/t + 25.