Use and Care Guide

Item # WPUMP1 1-Inch Water Pump Assembly And Operating
Instructions
6
!
COMPONENTS
1) Tube!Frame!
2) Pull!Start!Handle!
3) On/Off!Switch!
4) Water!Inlet!
5) Water!Outlet!
6) Priming!Cap!
7) Fuel!Tank!
8) Fuel!Cap!
9) Air!Filter!Assembly!
GENERAL PRODUCT SPECIFICATIONS
SPECIFICATIONS
Engine 2-Stroke
Engine Type 2-Cycle
Engine Displacement 43cc
Horsepower 1.4 HP
Noise Level @ 7 meter 83 dB
Runtime: 1 hour for full tank
Requires: 0.5376 ounces of 2-Cycle
Engine oil with 26 ounces of
gasoline
Spark Plug : Type F6TC
FEATURES
Max. Lift Head 98 Ft (30m)
Max. Suction Head 26 Ft. (8m)
Pump Speed 6,500
RPM
Air-Cooled, TCI Ignition
Flow : 2,020 x 85% GPH @ 0 Lift
1,119 x 85% GPH @ 70 Ft. Lift
ASSEMBLY
The Intake Filter prevents damaging
particles from “entering” the Water Pump.
Connect the Intake Filter (A) to the end of a
garden hose.
Place the Hose Coupling (D) and
secure it to the
Put the Gasket (D) into the hose coupling (C)
and secure it to the other end of the hose.
Then
connect the entire assembly to the water intake side.
Place the gasket (D) into the Hose Coupling (C), and
secure it to the water outlet side. Then connect the
other end of Hose Coupling (C) to the hose.
PACKAGE CONTENTS
1-Inch Water Pump