Use And Care Manual

www.sportdog.com 7

To Test the NoBark 18

Important: To avoid feeling the Correction

yourself, never touch the two Contact Points

simultaneously.

1. Turn the Mode Switch to TEST.

2. Hold the unit by the collar with the Indicator Light facing

towards you and ﬁ t the Test Light Tool to the Contact

Points. The unit should be within 6-10 inches of your

mouth.

3. Say “Test” loudly into the Sound Activated Sensor.

4. The Indicator Light and Test Light Tool will ﬂ ash three

times to show that it is functioning properly.

5. If the Indicator Light and/or Test Light Tool do not

ﬂ ash, ensure that the battery is properly installed, and/

or replace the battery.

If the Indicator Light and/or Test Light Tool still do not

ﬂ ash, contact the Customer Care Center at

1-800-732-0144.

6. Return the Mode Switch to Low before replacing the

NoBark 18 on your dog.

Note: The TEST Mode is not intended for normal operation. If

the NoBark 18 is left in TEST Mode while on your dog, it can

cause false correction and may reduce battery life.