Installation Guide

6 1-800-732-0144
KEY DEFINITIONS
TRANSMITTER
INDICATOR LIGHT
TRANSMITTER ANTENNA
UPPER
BUTTON
LOWER
BUTTON
SIDE
BUTTON
(TONE)
INTENSITY
DIAL
CONTACT POINTS
REMOTE TRANSMITTER: Transmits the radio
signal to the Collar Receiver. It is water resistant
and cannot be submerged in water.
INTENSITY DIAL: Provides multiple levels of static
stimulation so you can match the correction to
your dog’s temperament.
TRANSMITTER INDICATOR LIGHT: Indicates
that a button is pressed and also serves as a low
battery indicator.
UPPER BUTTON: This button is factory-set to
deliver Continuous Static Stimulation.
LOWER BUTTON: This button is factory-set to
deliver Continuous Static Stimulation two levels
higher than the setting on the Intensity Dial.
SIDE BUTTON: This button is factory-set to deliver
a tone without static stimulation.
COLLAR RECEIVER: Receives the radio signal
from the Remote Transmitter and delivers the
stimulation for correcting or cueing your dog. It is
waterproof and can be submerged in water.
RECEIVER INDICATOR LIGHT: Indicates when the
Collar Receiver has been turned on or off .
CONTACT POINTS: The contacts through which the
Collar Receiver delivers static stimulation when
the Remote Transmitter’s Upper or Lower Button
is pressed.
ON/OFF BUTTON: Pressing and releasing this
button turns the Collar Receiver on/off .
CONTINUOUS STATIC STIMULATION: You control
both when and how long static stimulation
(correction) is delivered to your dog through the
Collar Receiver’s Contact Points by pressing the
Upper or Lower Button. When a Continuous Static
Stimulation button is pressed for 8 seconds or
more, the Remote Transmitter will “time-out.”
The button will need to be released and pressed
again before additional static stimulation can be
delivered.
BRIEF CORRECTION (NICK): Pressing and quickly
releasing either the Upper or Lower Button.
ON/OFF
BUTTON
RECEIVER
INDICATOR LIGHT