Installation Guide

WWW.SPORTDOG.COM 21
TROUBLESHOOTING
The answers to these questions should help you solve any problem you have with this system. If they do not,
please contact the Customer Care Center at 1-800-732-0144 or visit our website at www.sportdog.com.
My dog is not responding when I press
a button.
• Check to see if the Collar Receiver has been turned on and the
Indicator Light is fl ashing.
• If your range has reduced from the fi rst time you have used it, your
Remote Transmitter or Collar Receiver batteries may need to be
replaced.
• Many factors can impact the range you have with the YardTrainer
105S. For a list of these factors, please refer to “How the System
Works.”
• You can verify the Collar Receiver is delivering static stimulation to
your dog by placing the test light, enclosed in your kit, on the Collar
Receiver. Please refer to the “Test Light Instructions” for details.
• Increase the Intensity Dial. Refer to “Find the Best Intensity Level For
Your Dog” for more information.
• Make sure the Collar Receiver’s Contact Points are placed snugly
against your dog’s skin. Refer to “Fit the Collar Receiver” for more
information.
• You may need to switch to the longer Contact Points included with
your system or trim the hair beneath the Contact Points.
The Collar Receiver will not turn on. • Try replacing the batteries (see page 8).
The Collar Receiver is not responding to
the Remote Transmitter.
• Verify the Collar Receiver has been turned on and the Indicator Light
is fl ashing. Refer to “Turning the Collar Receiver On and Off .”
• Refer to “Match the Collar Receiver and Remote Transmitter.”
• Try replacing the batteries.
TEST LIGHT INSTRUCTIONS
1. Turn the Collar Receiver on.
2. Hold the Test Light Contacts to the Contact Points.
3. Press a Static Stimulation Button on the Remote Transmitter.
4. The Test Light will fl ash.
NOTE: At higher static stimulation levels, the Test Light will fl ash brighter.
5. Turn the Collar Receiver off .
Save the Test Light for future testing.
NOTE: If the Test Light does not fl ash, replace the batteries and retest. If the Test Light still does not fl ash, contact the
Customer Care Center at 1-800-732-0144.