Brochure

Page 38 – Bulletin 40-10
JP232 CAP TUBE ADAPTER
To simplify the application of Catch-All
Filter-Driers on systems with cap tubes,
Sporlan has designed a brass adapter
that fits all standard 1/4” ODF solder
fittings. This adapter can be used with the
C-032-S, C-052-S, and C-082-S models. As
shown in the illustration, one end of the
adapter is suitable for 0.125” OD tubing
and the other is suitable for cap tubes of
MOUNTING BRACKETS
Order Separately
Mounting Brackets designed especially
for replaceable core type Catch-All
Filter-Driers and RSF shells are avail-
able. All brackets are supplied with a bolt,
nut, and washer.
A
D
E
B
C
For .087”, .090” or .093”
(2.2 mm, 2.3 mm or 2.4 mm) O.D. tubing
For .125”
(3.2 mm)
O.D. tubing
JP-232
MODEL
NUMBER
DIMENSIONS
A B C D E
Inches mm Inches mm Inches mm Inches mm Inches mm
A-685 4.75 121
.41 x
.81
Slot
10 x
21
Slot
3.50 89 6.12 155 0.12 3.0
A-175-1 3.50 89 3.50 89 4.62 117 0.12 3.0
A-174-2 6.00 152 4.00 102 7.44 189 0.12 3.0
Accessories
a-685
Mounting Bracket for shell types C-480
thru C-19200 Series and RSF shells. ONE
bracket per package. Depending on
shell size and installation requirements,
more than one bracket may be required.
Catch-Alls larger than the C-480 and RSF-
480 Series shells generally require two
brackets.
Mounting Bracket Dimensions
a-175-1
Mounting Bracket for shell types
C-R424-G, C-R425-G, and C-R427-G
ONLY. ONE bracket per package. Usually
one bracket is adequate for mounting
these Catch-Alls.
a-175-2
Mounting Bracket for shell types C-30000
and C-40000 Series. TWO brackets per
package. Two brackets are generally ade-
quate for mounting these large Catch-Alls.
.087”, .090”, or .093” OD. This adapter
CANNOT be used with the C-032-CAP or
C-032-CAP-T Catch-Alls.
The adapter can be brazed to the
capillary tubing and the unit fitting in one
operation. These adapters are available
from all Sporlan wholesalers. Request
part number: JP-0232-000.
0.19”
(4.8 mm)
0.34”
(8.6 mm)
0.25”
(6.4 mm)