Brochure

Page 24 – Bulletin 40-10
REPLACEABLE CORES AND
FILTER ELEMENTS
Order Separately
Cores for replaceable core type filter-
driers are molded of exactly the same
desiccants that are used in the popular
sealed filter-driers.
Cores are individually packed in metal
cans, fully activated, and hermetically
sealed against moisture and dirt.
Filter elements are dried and packed
in individual sealed metal cans. This
method of packaging prevents the
element from picking up moisture from
the atmosphere.
Detailed instructions are printed on each
can. Each can contains a “triple gasket”
consisting of a new endplate gasket, an
endplate gasket for certain competitive
filter-driers, and a core gasket where
desired. See the specifications on pages
22 and 23 for the number of cores
required for each type filter-drier.
rcW-42
High Water Capacity Core — Order as
separate item—Fits ONLY shell types
C-R424-G, C-R425-G, and C-R427-G.
Designed specially for use with
POE lubricants. This core should be used
on systems that have a ruptured water
cooled condenser, or that have been
exposed to the atmosphere, or for some
reason have a high amount of moisture in
the system.
rc-4864
Activated Core — Order as separate
item—Fits types C-480 thru C-19200
Series shells and Replaceable Suction
Filter (RSF) shells. This is the standard
core suitable for liquid and suction line
applications.
rcW-48
High Water Capacity Core — Order as
separate item—Fits types C-480 thru
C-19200 Series shells and Replaceable
Suction Filter (RSF) shells. Designed
specially for use with POE lubricants.
This core should be used on systems that
have a ruptured water cooled condenser,
or that have been exposed to the atmo-
sphere, or for some reason have a high
amount of moisture in the system.
rc-4864-hh
Activated Charcoal Core — Order as sepa-
rate item—Fits types C-480 thru C-19200
Series shells and Replaceable Suction
Filter (RSF) shells. This core should be
used for wax removal on low temperature
systems, and for clean-up of systems that
have had a hermetic motor burnout.
rpe-48-Bd
Filter Element — Order as a separate
item—Fits types C-480 thru C-19200
Series shells and Replaceable Suction
Filter (RSF) shells. This element should
be used in RSF shells installed in the
suction line to obtain the lowest possible
pressure drop after cores were used for
system clean-up.
Sporlan cores and filter elements can replace drier shells made by most
other filter-drier manufacturers.
PART
NUMBER
NUMBER
PER CARTON
NET WEIGHT
Each
SHIPPING
WEIGHT
CORE DIMENSIONS
O.D. x Length
lb kg lb kg Inches mm
REPLACEABLE CORES
RCW-42 10 1.5 0.7 19 8.6 3.18 x 6.00 81 x 152
RC-4864
RCW-48
RC-4864-HH
12 1.9 0.9 28 12.7 3.74 x 5.50 95 x 140
RC-10098
RCW-100
RC-10068-HH
6 4.2 1.9 28 12.7 4.80 x 6.47 122 x 164
FILTER ELEMENTS
RPE-48-BD 12 0.8 0.4 13 5.9 3.70 x 5.50 94 x 140
RPE-100 6 1.1 0.5 9 4.1 4.80 x 6.47 122 x 164
rc-10098
Activated Core — Order as separate
item—Fits types C-30000 and C-40000
Series shells. This is the standard core
suitable for liquid and suction line
applications.
rcW-100
High Water Capacity Core — Order as
separate item—Fits types C-30000 and
C-40000 Series shells. Designed specially
for use with POE lubricants. This core
should be used on systems that have a
ruptured water cooled condenser, or that
have been exposed to the atmosphere, or
for some reason have a high amount of
moisture in the system.
rc-10098-hh
Activated Charcoal Core — Order as
separate item—Fits types C-30000 and
C-40000 Series shells. This core should be
used for wax removal on low temperature
systems, and for clean-up of systems that
have had a hermetic motor burnout.
rpe-100
Filter Element — Order as a separate
item—Fits types C-30000 and C-40000
Series shells. This filter element should
be used in the suction line to obtain the
lowest possible pressure drop after cores
were used for system clean-up.
Unit Net Weights and Carton Shipping Weights
Cores / Elements