Brochure

Application
Types B19 and E19 Series are pilot operated sole-
noid valves for refrigeration and air conditioning ap-
plications. They are suitable for suction service because
very low pressure differential, 1 psi, is required for full
operation. These valves may be mounted horizon-
tally, on their side or in a vertical line.
The Type E19 series solenoid valves feature extend-
ed solder type connections as standard. One important
benefit to the user is that all valves in the “E19” se-
ries can be installed without disassembly using either
low or no silver content brazing alloy.
The MKC-2 and OMKC-2 coil are Class “F” tempera-
ture rated and are provided as standard, therefore a high
temperature coil is not required for discharge service.
Ordering Instructions
When ordering complete valves, specify Valve Type,
Connections, Voltage and Cycles.
When ordering Body Assembly, specify Valve Type
and Connections.
When ordering Coil Assembly ONLY, specify Coil
Type, Voltage and Cycles.
Example: MKC-2 120/50-60; OMKC-2 120/50-60.
Dimensions – Inches
Bulletin 30-10 / Page 13
22, 134a, 401A, 402A, 404A, 407C, 502, 507 Types B19 and E19 Series
1.75 Coil
Removal
3.17
D
D'
*B
C
A
1.75 Coil
Removal
3.17
D
*B
C
A
n
Maximum rated pressure 500 psi.
n
Dual voltage 4-wire coils, 120-208-240/50-60 are available at slight additional cost. For
other voltages and cycles, consult Sporlan, Washington, MO 63090.
n
See Pages 19 and 20 for water and steam valves.
n
Available with conduit boss or junction box at no extra charge.
n
For capacity at other pressure drops, see Pages 4 and 5.
n
For mounting holes and/or bracket information see Bulletin 30-11.
EVLAV
SEIRES
EPYT
SNOITCENNOC
sehcnI
ninwohsseziS
EULB eblliw
sselnudehsinruf
.deificepsesiwrehto
TROP
EZIS
sehcnI
DPOM
isp
SEITICAPACDIUQILLANIMON
noitaregirfeRfosnoT
SGNITARLIOC
STNAREGIRFER
22 a431 A104 A204 A404 C704 205 705
porDerusserP – isp
CA CD 3 2 2 3 3 3 3 3
DRADNATS
SELCYC/STLOV
STTAW
CA CD
91B
2P91B elameFTPN4/3
23/91
003 052
2.42 4.81 8.91 0.61 0.61 3.22 7.51 7.51
06-05/42
06-05/021
06-05/042-802
06-05/042-802-021
51 81
2S91B
MDO8/1-1-FDO8/7
003 052
2S91BM
2S91BO 572
91E
052S91E
FDO8/5XFDO8/5 003 052
052S91EM
072S91E
FDO8/7XFDO8/7
003 052
072S91EM
072S91EO 572
092S91EM FDO8/1-1XFDO8/1-1 003 052
Specifications — MKC-2 and OMKC-2 Coil
Type E19S250
Normally Closed
Type MB19S2
Normally Closed
Type OB19S2
Normally Open
EPYT A B*
C D 'D
GNITTIF
HTPED
91B
2P91B 00.3
18.0
13.3 38.3
–
2S91B
FDO8/5
78.3
26.0
FDO8/7 88.0 57.0
91E
052S91E 88.6
14.3 78.3
05.0 –
072S91E 31.7 57.0 –
ODF
ODM
VALVE
SERIES
NORMALLY
CLOSED
NORMALLY
OPEN
*Add 1.12” for Valves with Manual Lift Stem.
E19
SERIES
B19
SERIES
1.89
Optional 1/2” Conduit Boss
and Listed
Approved