Replacement Parts List

Replaceable Core Catch-All
®
Filter-Driers
C-480 Series through C-1920 Series See Parts Table on Page 38
1 The B & C/D designs can be differentiated by external shell appearance. The welded cap on the outlet of the shell fits inside the body
shell on B versions and it slides over the body shell on C/D versions.
2 Access valve (P/N: 183174) is available. Valve core (P/N: 480088) can be purchased separately.
3 Design A components are subject to availability.
2 Pipe Plug
Endplate
(“-G” Feature
Shown)
Gasket,
Endplate
Spring, End
Core
Plate, Core
Positioning
(Solid)
Plate, Core
Spacer
Core
Screen, Outlet
100 Mesh
Screen, Outlet
100 Mesh
Gasket, Outlet
Screen (Felt)
Screen, Outlet
10 Mesh
Plate, Outlet
Core Retainer
Plate, Outlet
Core Retainer
Gasket, Outlet
Retainer Plate
Plate, Outlet
Core Retainer
(Spring & Screw
are included)
Gasket, Outlet
Retainer Plate
(“Press Fit” onto
Plate, Outlet Core
Retainer)
Gasket, Outlet
Retainer Plate
Shell
(with Domed
End Cap)
Shell
Shell
Bolt
(8 Required)
Nut
(8 Required)
Nut
(8 Required)
Nut
(8 Required)
Tie Rod
(3 Required)
Tie Rod
(3 Required)
Tie Rod
(3 Required)
Design A
3
Manufactured until 1983
Design B
1
Manufactured 1983 - 1991
Design C
1
Manufactured 1991 - May 1999 (ODF Version)
(Currently used in “-P” Type Catch-Alls Only)
Mounting Bracket
Item No.: 481304, A-685 Mounting Bracket
for shell types C-480 thru C-1920 series. One
bracket per package. Depending on shell size
and installation requirements, more than one
bracket may be required. Catch-Alls larger
than C-480 series generally require two brack-
ets. These brackets are also used for Replace-
able Suction Filters. All brackets are supplied
with a bolt, nut, and washer.
Design D shells
on Page 40
BULLETIN 122 – Page 39