Replacement Parts List

Page 14 – BULLETIN 122
Thermostatic Expansion Valves
Flange Series
THERMOSTATIC EXPANSION VALVE REPLACEMENT PARTS
ITEM
NUMBER
PART NUMBER and DESCRIPTION
DRAWINGS ON PAGES 16, 17 and 18
VALVE TYPE and QUANTITY OF PART
REQUIRED PER VALVE
H M V W A D
****
† 106-001
Bottom Cap Gasket
1 1
183620 123-002 1 1
183625 123-005 1
183890 † 358-000
Bottom Cap Locknut
1 1 1
****
958-000 1
183620 123-002
Bushing Gasket
2
** **
183750 123-000 2 2
184930 † 108-000
Discharge Tube
A - 1/8” (20T) 1
184932 † 108-001 A - 5/32” (30T) 1
184934 † 108-002 A - 3/16” (50T) 1
184920 † 208-001 D - 1/32” (1T) 1
184922 † 208-002 D - 1/16” (2T) 1
184924 † 208-000 D - 5/64” (5T) 1
184926 † 208-003 D - 7/64” (10T) 1
184928 † 208-004 D - 5/32” (15T) 1
****
† 139-000 Element Cap Screw 2
****
† 106-000
Element Gasket
1
183635 123-001 1 1 1
****
† 106-002 1
183745 † 106-003
Flange Gasket
2
183746 † 106-004 2
183765 123-004 2
****
578-000
Inlet Strainer Ring
1
183879 † 224-000 1*
****
† 124-000 1*
****
226-000 Inlet Strainer Screen 1
183034 † 1471-000
Inlet Strainer Screen Assy.
1
183029 763-000 1 1
183031 735-000 1
183032 † 3777-000 Inlet Strainer Screen Assy. 1 and 2 TON 1
183033 † 3777-001 Inlet Strainer Screen Assy. 5, 10, 15 TON 1
183030 961-000 Inlet Strainer Screen Retainer 1
183450 360-000
Pipe Flange (Female)
1/2” FPT 1 or 2 1 or 2
183452 360-001 3/4” FPT 1 or 2 1 or 2
183454 362-000 1” FPT 1 or 2 1 or 2
183456 † 374-000
Pipe Flange (Male)
1/2” FPT 1 or 2
183458 † 374-001 3/4” FPT 1 or 2
183460 † 375-000 1” FPT 1 or 2
183468 † 225-000 1/4” FPT 1 or 2*** 2
183470 † 225-001 3/8” FPT 1 or 2*** 2
183472 † 225-002 1/2” FPT 1 or 2*** 2
† TEV Type handled by Parker Refrigerating Specialties Division. Parts listed for reference only. Please contact R/S Division for replacement parts.
* Used in place of inlet strainer screen when external strainer is used with the valve.
** M and V valves use wolverine style bushing gaskets which are not compatible with ammonia. The gaskets used on the A valve and the MA17 solenoid
valve are very similar to the M and V valve bushing gaskets; however this material is compatible with Ammonia.
*** Can be added to Type “H” valve with adaptor kit number K-1178.
**** Not available.
(Table Continues on Page 15)