Brochure
EPYT A B C
D 'D E
GNITTIF
HTPED
3A
1P3A 88.1 44.0 02.2 –
–
1S3A
FDO4/1 70.2
82.0 63.2 44.0
FDO8/3 52.2
1F3A 83.2 22.0 24.2 –
3E
021S3E 36.4 55.0 40.2
13.0 –
82.0
031S3E 65.4 94.0 01.2 91.0
5E
021S5E 36.4
35.0 84.2 32.0
031S5E 65.4
VALVE
SERIES
ODF
OFFSET
ODM
Application
Types A3 and E3 series are hermetic, direct-acting
type solenoid valves primarily for refrigeration and
air conditioning applications. The flow rate of the E3
and A3 are identical, therefore, the E3 may be freely
substituted for the A3.
The E5 series are compact solenoid valves with pilot
operated disc construction and are rated at 2.8 tons
R-22 at 3 psi pressure drop vs. 1.6 for the A3S1. These
valves may be mounted horizontally, on their
side or in a vertical line.
The Types E3 and E5 series solenoid valves feature
extended solder type connections as standard. One im-
portant benefit to the user is that all valves in the “E3”
and “E5” series can be installed using either low or no
silver content brazing alloy.
The MKC-l coil is Class “F” temperature rated and is
provided as standard, therefore a high temperature coil
is not required for discharge service.
Ordering Instructions
When ordering complete valves, specify Valve Type,
Connections, Voltage and Cycles.
When ordering Body Assembly, specify Valve Type
and Connections.
When ordering Coil Assembly ONLY, specify Coil
Type, Voltage and Cycles.
Example: MKC-1 120/50-60.
Dimensions – Inches
Page 8 / Bulletin 30-10
Types A3, E3 and E5 Series 22, 134a, 401A, 402A, 404A, 407C, 502, 507
Specifications — MKC-1 Coil
EVLAV
SEIRES
EPYT
SNOITCENNOC
sehcnI
ninwohsseziS
EULB
eblliw
sselnudehsinruf
.deificepsesiwrehto
TROP
EZIS
sehcnI
DPOM
isp
SEITICAPACDIUQILLANIMON
noitaregirfeRfosnoT
SGNITARLIOC
STNAREGIRFER
22 a431 A104 A204 A404 C704 205 705
porDerusserP – isp
CA CD 3 2 2 3 3 3 3 3
DRADNATS
SELCYC/STLOV
STTAW
CA CD
3A
1P3A 8/3 TPN elameF
101. 003 571 6.1 2.1 3.1 1.1 1.1 5.1 0.1 0.1
06-05/42
06-05/021
06-05/042-802
06-05/042-802-021
01 51
1S3A
&MDO8/3-FDO4/1
MDO2/1-FDO8/3
1F3A eralFEAS4/1
3E
021S3E FDO4/1XFDO4/1
031S3E FDO8/3XFDO8/3
5E
021S5E FDO4/1XFDO4/1
051. 003 571 8.2 1.2 3.2 9.1 9.1 6.2 8.1 8.1
031S5E FDO8/3XFDO8/3
C
D
E
B
1.56 Coil
Removal
2.92
A
Type A3F1
Type E3S130
or E5S130
Type A3P1
n
Maximum rated pressure 500 psi.
n
Dual voltage 4-wire coils, 120-208-240/50-60 are available at slight additional cost. For
other voltages and cycles, consult Sporlan, Washington, MO 63090.
n
See Pages 19 and 20 for water and steam valves.
n
Available with conduit boss or junction box at no extra charge.
n
For capacity at other pressure drops, see Pages 4 and 5.
n
For mounting holes and/or bracket information see Bulletin 30-11.
n
E3 and E5 series with mounting holes are NOT standard.
1.56 Coil
Removal
2.92
A
D'
D
C
B
1.64
Optional 1/2” Conduit Boss
A3 SERIES
and
E3 SERIES
(Extended
Connection)
E5
SERIES
and Listed
Approved