Brochure

Application
Types B10 and E10 Series are compact solenoid
valves with pilot operated disc construction for re-
frigeration and air conditioning. These valves may
be mounted horizontally, on their side or in
a vertical line. They are suitable for suction line
service because very low pressure differential, 1 psi,
is required for full operation.
The Type E10 series solenoid valves feature extend-
ed solder type connections as standard. One important
benefit to the user is that all valves in the “E10” se-
ries can be installed without disassembly using either
low or no silver content brazing alloy.
The MKC-2 and OMKC-2 coil are Class “F” tempera-
ture rated and are provided as standard, therefore a high
temperature coil is not required for discharge service.
Ordering Instructions
When ordering complete valves, specify Valve Type,
Connections, Voltage and Cycles.
When ordering Body Assembly, specify Valve Type
and Connections.
When ordering Coil Assembly ONLY, specify Coil
Type, Voltage and Cycles.
Example: MKC-2 120/50-60; OMKC-2 120/50-60.
Dimensions – Inches
Bulletin 30-10 / Page 11
22, 134a, 401A, 402A, 404A, 407C, 502, 507 Types B10 and E10 Series
1.75 Coil
Removal
3.17
A
D
C
*B
E
1.75 Coil
Removal
3.17
A
D
D'
C
*B
EVLAV
SEIRES
EPYT
DRADNATS
SNOITCENNOC
sehcnI
TROP
EZIS
sehcnI
DPOM
isp
SEITICAPACDIUQILLANIMON
noitaregirfeRfosnoT
SGNITARLIOC
STNAREGIRFER
22 a431 A104 A204 A404 C704 205 705
porDerusserP – isp
CA CD 3 2 2 3 3 3 3 3
DRADNATS
SELCYC/STLOV
STTAW
CA CD
01B
2S01B
MDO4/3-FDO8/5
61/5
003 052
1.11 5.8 1.9 3.7 3.7 2.01 2.7 2.7
06-05/42
06-05/021
06-05/042-802
06-05/042-802-021
51 81
2S01BM
2F01B
eralFEAS2/1 003 052
2F01BM
01E
042S01E
FDO2/1XFDO2/1
003 052
042S01EM
042S01EO 572
052S01E
FDO8/5XFDO8/5
003 052
052S01EM
052S01EO 572
n
Maximum rated pressure 500 psi.
n
Dual voltage 4-wire coils, 120-208-240/50-60 are available at slight additional cost. For
other voltages and cycles, consult Sporlan, Washington, MO 63090.
n
See Pages 19 and 20 for water and steam valves.
n
Available with conduit boss or junction box at no extra charge.
n
For capacity at other pressure drops, see Pages 4 and 5.
n
For mounting holes and/or bracket information see Bulletin 30-11.
Type MB10S2
Normally Closed
Type E10S250
Normally Closed
Type OB10S2
Normally Open
EPYT A B*
C D 'D E
GNITTIF
HTPED
01B
2S01B
52.3 95.0 51.3 44.3
26.0 05.0
–
2F01B –
01E
042S01E 00.5
68.0 31.3 24.3
83.0
– 93.0
052S01E 05.6 05.0
ODF
ODM
OFFSET
*Add 1.12” for Valves with Manual Lift Stem.
VALVE
SERIES
NORMALLY
CLOSED
NORMALLY
OPEN
E10
SERIES
B10
SERIES
1.89
Optional 1/2” Conduit Boss
and Listed
Approved
Specifications — MKC-2 and OMKC-2 Coil