User Guide

Page 18 / BULLETIN 10-9
SAE
Flare
ODF
Solder
FTP
Pipe-
Flange
ODF
Solder-
Flange
tnaregirfeR
gninoitidnoCriA
ro
pmuPtaeH
laicremmoC
tnaregirfeR
05 F° 01–ot F°
erutarepmeTwoL
tnaregirfeR
0 F° 04–ot F°
erutarepmeTwoLemertxE
tnaregirfeR
04– F° 001–ot °F
21 06PCF CF PZF&ZF
22 AGVdna001PCV CV 04PZV&ZV VX
a431 06PCJ CJ —
———
—
—
A404 511PCS CS PZS&ZS SX
A014 ZN
205 511PCR CR ZPR&ZR RX
705 — CP ZPP&ZP PX
717 .31egapnonoitaregirferainommanonoitcesehtotrefeR
*Application Factors:
1. The Type ZP charges have essentially the same characteristics as the Type Z charge with one exception: They produce
a pressure limit (MOP). ZP charges are not intended as replacements for Z charges. Each should be selected for its
own unique purpose. See Page 8 for additional application discussion.
2. All air conditioning and heat pump charges are intended for use with externally equalized valves. See Page 5 for com-
plete discussion on when to use an external equalizer.
3. Type L Liquid charges are also available for most commonly used refrigerants in most element sizes.
4. If in doubt as to which charge to use, review discussion on Pages 7 and 8 or contact the Sporlan Division of Parker
with complete system data.
SPORLAN SELECTIVE CHARGES ENGINEERED for PEAK
PERFORMANCE for EACH SPECIFIC APPLICATION
Recommended Thermostatic Charges*