User Guide

Splitvolt, Inc. 4
LED indications
The charger is equipped with an LED panel that indicates the various
states of the product, including fault and charging status.
No.
Condition
Power
Charge
Fault 1
Fault 2
1
Initialization
Flash once
Flash once
Flash once
Flash once
2
EV Connection Ready
On
Off
Off
Off
3
Charging
On
Flashing
Off
Off
4
Charging Completed
On
On
Off
Off
5
Power Self-Test Failure
On
Off
On
On
6
Communication Failure
On
Off
Off
On
7
Overvoltage or
Undervoltage
On
Off
On
Off
8
Grounding Failure
On
Off
Off
Flashing
9
Overcurrent
On
Off
Flashing
Off
10
Power Leakage
On
Off
Flashing
Flashing
11
Overheated
On
On
On
On
Troubleshooting
If you are having trouble, note the LEDs on your unit and consult the
table above to determine the status of your system. Then follow the
steps in the table below to resolve the problem. Check our website
(www.splitvolt.com) and contact us if you are still unable to resolve.
No.
Condition
Resolution
1
Initialization
Normal initialization upon plug-in
2
EV Connection Ready
Plug handle into EV to start charging
3
Charging
Charging normally
4
Charging Completed
Completed charging
5
Power Self-Test Failure
Unplug from wall power and EV, then plug both
back in
6
Communication
Failure
Unplug from wall power and EV, then plug both
back in
7
Overvoltage or
Undervoltage
Unplug from wall power and EV, then plug both
back in. If fault returns, test power source,
contact electrician.
8
Grounding Failure
Unplug from wall power and EV, then plug both
back in. If fault returns, test power source,
contact electrician.