User Guide

Splitvolt, Inc. 3
Warnings
● This device contains no user-serviceable parts—do not open
● Do not submerge this device in water
● Do not use this product if the cable or any other part is damaged
● Intended for Electric Vehicle charging use only
● For use with standard U.S. household 30-amp or 50-amp circuits
● Rated for NEC maximum safe continuous charging of 24 or 40 amps
Product Diagram
How to start charging
1. Take out the charger and fully insert the 240-volt plug into the
wall socket outlet
2. Remove the cover and a) for non-Tesla vehicles, plug the J1772
vehicle connector into your vehicle inlet; or b) for Tesla vehicles
attach the standard J1772 adapter and insert into vehicle inlet
3. The device will start charging automatically while the
READY/CHARGE, POWER indicators are all green
How to stop charging
1. Press the button and disconnect the J1772 vehicle connector
from the vehicle inlet
2. Close protective cap of vehicle inlet
3. If necessary, disconnect the plug from the socket outlet
Vehicle Connector’s Button
Vehicle Connector
EV Cable
Control Box with LEDs
Power Plug