User Manual

Phonitor 2
31
Measurements
Frequency Response Input/Headphone Output, Left and Right Channel
Measuring output and input 600 Ohm, Volume control Phonitor 2 0 dB:
‹10 Hz to ›200 kHz (-0.2dB; ‹10 Hz to ›480 kHz @-3dB).
The large frequency response range excludes that the frequency spec-
trum is limited at any point. Formants and octaves of an instrument’s
sounds cannot be narrowed.
Phase Response Input vs. Output, Left and Right Channel
Measuring output and input 600 Ohm, Volume control Phonitor 2 0 dB.
This measurement shows the minimum deviation of phase in the upper
frequency range. Phase response describes the time difference be-
tween input and output signal – the less, the better. The extremely
tight phase response up to 50 kHz excludes any audible effects.