User Manual

21
Neos
Specifications
Inputs & Outputs
Electronically balanced instrumentation amplifiers
Sockets Inputs: DB25/TASCAM, XLR
Outputs: XLR
Input Impedance 10 k Ohm balanced/20 kOhm unbalanced
Output Impedance 75 Ohm balanced/75 Ohm unbalanced
Nominal Input Level +4 dBu
Maximum Input Level › +30 dBu (30 dBu = limit of measuring equipment)
Maximum Output Level › 24 dBu
Measurements
Frequency Range (-3 dB) 10 Hz to › 200 kHz
Phase 1kHz: 0°/10kHz: -4,5°/ 20kHz: -8.30°
Common Mode Rejection Ratio › 60 dB
(Rec. Out, Insert Send, Monitor A/B)
THD Rec. Out Insert Send Monitor A/B
10Hz 0.0011% 0.0011% 0.0016%
100Hz 0,00060% 0.0009% 0.0016%
1000Hz 0.00090% 0.0013% 0.0020%
5000Hz 0.0032% 0.003% 0.004%
10kHz 0.0028% 0.0018% 0.0027%
22kHz 0.00054% 0.00050% 0.0005%
(Generator output 24dBu, inputs terminated with 40 dBu)
Signal to Noise Ratio (A-weighted) Rec. Out Insert Send Monitor A/B
92 dBu 92 dBu 88 dB
(22 Hz - 22 kHz, inputs terminated with 40 dBu)
Dynamic range › 122 dB
Power Supply
Linear power supply with toroidal transformer
Operational Voltage +/- 60 Volt (120 Volt)
Power Consumption (stand by) 230 Volt/50Hz : 0.420 A, 75W, 97,8 VA
Fuses 230 V AC, 50 Hz: 315 mA
115 V AC, 60 Hz: 630 mA
Voltage Selector 115 V/230 V
Dimensions and Weight
Front panel including rack brackets 19"/7 U (483 x 310 mm)
Front panel without rack brackets 440 mm
Housing (W x H x D) 483 x 235 x 330 mm, depth incl. sockets 355 mm
Further Dimensions on page 22
Weight 14.1 kg/ca. 31.08 lbs
Dimensions and Weight External Power Supply
W x H x D 154 x 67 x 236 mm
Gewicht 3 kg/6.61 lbs
Notes:
0 dBu = 0,775 V. All measurements at unity gain.
Specifications are subject to change without notice.