User Manual

RackPack: DynaMaxx

Important Security Information

Lightning: Before thunderstorms or other severe weather, disconnect

the machine from wall power (but to avoid life threatening lightning

strikes, not during a storm). Similarly, before any severe weather, dis-

connect ALL the power connections of other machines and antenna and

phone/internet cables which may be interconnected so that no light-

ning damage or overload results from such secondary connections.

Air Circulation: Chassis openings offer ventilation and serve to pro-

tect the machine from overheating. NEVER cover or otherwise close

off these openings. NEVER place the machine on a soft surface (car-

pet, sofa, etc.). Make sure to provide for a mounting space of 4-5 cm/2

inches when mounting the machine in racks or cabinets.

Controls And Switches: Operate the controls and switches only as

described in the manual. Incorrect adjustments outside safe para-

meters can lead to damage and unnecessary repair costs. Never use

the switches or level controls to effect excessive or extreme changes.

Repairs: Unplug the machine and immediately contact a qualified

technician when you think repairs are needed – or when moisture or

foreign objects may accidentally have gotten in to the housing, or in

cases when the machine may have fallen and shows any sign of having

been damaged. This also applies to any situation in which the machine

has not been subjected to any of these unusual circumstances but

still is not functioning normally or its performance is substantially

altered.

In cases of damage to the power cord or its plug, first consider turning

off the main circuit breaker before unplugging the power cord.

Replacement/Substitute Parts: Be sure that any service technician

uses original replacement parts or those with identical specifications

as the originals. Incorrectly substituted parts can lead to fire, electri-

cal shock, or other dangers, including further equipment damage.

Safety Inspection: Be sure always to ask a service technician to con-

duct a thorough safety check and ensure that the state of the repaired

machine is in all respects up to factory standards.

Cleaning: In cleaning, do NOT use any solvents, as these can damage

the chassis finish. Use a clean, dry cloth (if necessary, with an acid-

free cleaning oil). Disconnect the machine from your power source

before cleaning.