User Manual

34
Crimson 3
Audio Interface with Analog Monitoring
Content
Analog Inputs
The Crimson 3 allows the simultaneous recording of up to four analog inputs. To determine
which signal you want to monitor use the switches underneath the Inputs as follows:
Switch 1|2 engaged: you hear Mic or Line inputs 1 and 2.
Switch 3|4 engaged: you hear Instrument or Line inputs 3 and 4.
When recording a mono vocal track it makes sense to hear it in the center of the stereo
image (rather than hard left or hard right), so you should engage the Mono switch as well.
DAW Returns
The Crimson 3 has four DA converters that allow to monitor two stereo signals (four
channels) from the DAW.
Switch 1|2 engaged: you hear the Mix from DAW outputs 1/2.
Switch 3|4 engaged: you hear, for example, an AUX mix from DAW outputs 3/4.
Control Elements