User Manual

9
Cabulator
Rear Panel
Overview, Wiring Examples
Guitar amplifierCabinet
Power
cable
USE SPEAKER CABLE
USE SPEAKER CABLE
You can use balanced or unbalanced TRS connections with the D. I. OUTPUT. Please
p
ay attention to further advices on sockets and switches on the following
p
ages as well as the security advices on
p
ages 4 and 5.
P. A.
(F.O.H./monitoring)
AD converter
(Interface/DAW)
or
SPEAKER IN
SPEAKER IN
Developed by Tonehunter, Germany
www.tonehunter.com
SERIAL NUMBER
8Ω
Load Only !
Connect to Speaker
Out of Amplifier
Max: 100 Watts
Tip = (+)/Sleeve = GND
SOAK OUTPUT
SOAK OUTPUT
Power Soak
Output
Tip = (+)/Sleeve = GND
Connect to
Speaker Cabinet
4Ω to 16 Ω Load
Transformer Bal.
Line Output
Tip = (+)/ Ring = (–)
Sleeve = Audio GND Only!
DC 9V
Connect to
Recording Device,
Stagebox, etc.
D.I. OUTPUT
D.I. OUTPUT
DC POWER
DC POWER
–
+
® The Tonehunter logo is a registered
trademark of To nehunter Ltd.
MADE IN GERMANY
IN ORDER TO AVOID POSSIBLE DAMAGE OF
YOUR GUITAR AMPLIFIER DO NOT SET ITS
MASTER VOLUME ABOVE 70%.
REFER TO MANUAL FOR MORE INFORMATION.
IMPORTANT ADVICE
Sound Performance Lab
www.spl.info
® The SPL logo is a registered
trademark of SPL electronics GmbH