User Manual

14
Cabulator
Setup 2: Power Soak Only
SPEAKER IN
SPEAKER IN
Developed by Tonehunter, Germany
www.tonehunter.com
SERIAL NUMBER
8Ω
Load Only !
Connect to Speaker
Out of Amplifier
Max: 100 Watts
Tip = (+)/Sleeve = GND
SOAK OUTPUT
SOAK OUTPUT
Power Soak
Output
Tip = (+)/Sleeve = GND
Connect to
Speaker Cabinet
4Ω to 16 Ω Load
Transformer Bal.
Line Output
Tip = (+)/ Ring = (–)
Sleeve = Audio GND Only!
DC 9V
Connect to
Recording Device,
Stagebox, etc.
D.I. OUTPUT
D.I. OUTPUT
DC POWER
DC POWER
–
+
® The Tonehunter logo is a registered
trademark of Tonehunter Ltd.
MADE IN GERMANY
IN ORDER TO AVOID POSSIBLE DAMAGE OF
YOUR GUITAR AMPLIFIER DO NOT SET ITS
MASTER VOLUME ABOVE 70%.
REFER TO MANUAL FOR MORE INFORMATION.
IMPORTANT ADVICE
Sound Performance Lab
www.spl.info
® The SPL logo is a registered
trademark of SPL electronics GmbH
1: Connect 8 ohms amplier output via speaker cable to SPEAKER IN at the Cabulator.
2: Connect Cabulator SOAK OUTPUT via speaker cable to 4-16 ohms cabinet.
1
2