User Manual
Table Of Contents
- 1: Introduction/Overview
- 1.1 Documentation notes
- 1.2 Important safety note
- 1.3 Product introduction
- 1.4 General product handling and operation
- 1.4.1 Protection from water and dust ingress
- 1.4.2 Powering on/off and sleep mode
- 1.4.3 Attaching, detaching, and handling modules
- 1.4.4 Attaching the strap
- 1.4.5 About the touchscreen display
- 1.4.6 Selecting the active interface
- 1.4.7 Running a function or test
- 1.4.8 Repeating a function or test
- 1.4.9 Screen title bar buttons/icons
- 1.4.10 Capturing a screen image (screenshot)
- 1.4.11 Stopping a test
- 1.4.12 Saving results
- 1.4.13 Maximum test duration for continuous tests
- 1.4.14 Interpreting results
- 1.4.15 Important MoCA module compatibility note
- 1.5 Remote control of the unit
- 1.6 Licensed feature details
- 1.7 Maintenance
- 1.8 FTP information
- 1.9 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100/1G Testing Menu
- 4: System Menu
- 4.1 Record Manager
- 4.2 Admin Port
- 4.3 Set Date and Time
- 4.4 Sync with PC
- 4.5 Version Info
- 4.6 Battery Status
- 4.7 Download IPTV Channel Guide
- 4.8 Cal Touchscreen
- 4.9 Licensed Options
- 4.10 Update Firmware
- 4.11 System/Module Settings
- 4.11.1 System/Module Settings > Base Unit
- 4.11.2 System/Module Settings > RF Video Module
- 4.11.3 System/Module Settings > ADSL/VDSL2 Module
- 4.11.4 System/Module Settings > Combined Module Default
- 4.11.5 System/Module Settings > MoCA Module
- 4.11.6 System/Module Settings > DOCSIS Module
- 4.11.7 System/Module Settings > CSM Module
- 4.11.8 System/Module Settings > MoCA-RF Module
- 4.11.9 System/Module Settings > Wi-Fi
- 4.12 Taskforce
- 4.13 Signature Capture
- 4.14 Language Selection
- 4.15 Help and Support
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Info
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 Packet Loss Test
- 5.7 Throughput
- 5.8 Speedtest
- 5.9 IP Video testing
- 5.9.1 Video QoS (Quality of Service)
- 5.9.2 Change Channel
- 5.9.3 Channel Guide Settings
- 6: Specifications
Tech-X Flex
®
(P5) Verizon Base Unit User Guide Rev B PRELIMINARY 3/20/2014
4-7
Intro
Wi-Fi
10/100
System
IP/Video
Specs
• 10/100/1G Admin Port - Initiates a connection through the 10/100/1G Ethernet interface. Either
physical 10/100/1G connector may be used. Once in this area, the process of establishing a
connection is very similar to establishing a 10/100/1G connection for testing purposes with the
10/100/1G menu. For more information on behavior and parameters, see IP Network Setup on
page 3-3.
• Wi-Fi Admin Port - Initiates a connection through the Wi-Fi interface. Once in this area, the process
of establishing a connection is very similar to establishing a Wi-Fi connection for testing purposes
with the Wi-Fi menu. Note that all considerations and limitations involved with a test-related Wi-Fi
connection also apply to the Wi-Fi Admin Port. For more information on behavior and parameters,
see Wi-Fi Setup on page 2-3.
Figure 4-3 Admin Port results screen following a successful connection
Additionally, this area includes two additional commands related to remote control of the unit (see
Remote control of the unit on page 1-19):
• System > Admin Port > WAN Remote Control - See Remote site remote control (via the internet)
setup on page 1-33.
• System > Admin Port > Wi-Fi Admin Port > Ad-Hoc Remote Control - See Local remote control
(via ad hoc Wi-Fi) setup on page 1-31.
Upon a successful Admin Port connection, the results screen includes shortcuts to the following:
• F/W Update (Firmware update - see Update Firmware on page 4-11)
• FTP File (Record manager file upload - see Record Manager > Upload Files on page 4-5)
• FTP IP Chan (IPTV channel guide download - see Download IPTV Channel Guide on page 4-9)
In all cases, when a shortcut is launched, any applicable information from the Admin Port configuration
is automatically transferred to the respective setup screen.
Note the following important items: