User Manual
Table Of Contents
- 1: Introduction/Overview
- 1.1 Documentation notes
- 1.2 Important safety note
- 1.3 Product introduction
- 1.4 General product handling and operation
- 1.4.1 Protection from water and dust ingress
- 1.4.2 Powering on/off and sleep mode
- 1.4.3 Attaching, detaching, and handling modules
- 1.4.4 Attaching the strap
- 1.4.5 About the touchscreen display
- 1.4.6 Selecting the active interface
- 1.4.7 Running a function or test
- 1.4.8 Repeating a function or test
- 1.4.9 Screen title bar buttons/icons
- 1.4.10 Capturing a screen image (screenshot)
- 1.4.11 Stopping a test
- 1.4.12 Saving results
- 1.4.13 Maximum test duration for continuous tests
- 1.4.14 Interpreting results
- 1.4.15 Important MoCA module compatibility note
- 1.5 Remote control of the unit
- 1.6 Licensed feature details
- 1.7 Maintenance
- 1.8 FTP information
- 1.9 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100/1G Testing Menu
- 4: System Menu
- 4.1 Record Manager
- 4.2 Admin Port
- 4.3 Set Date and Time
- 4.4 Sync with PC
- 4.5 Version Info
- 4.6 Battery Status
- 4.7 Download IPTV Channel Guide
- 4.8 Cal Touchscreen
- 4.9 Licensed Options
- 4.10 Update Firmware
- 4.11 System/Module Settings
- 4.11.1 System/Module Settings > Base Unit
- 4.11.2 System/Module Settings > RF Video Module
- 4.11.3 System/Module Settings > ADSL/VDSL2 Module
- 4.11.4 System/Module Settings > Combined Module Default
- 4.11.5 System/Module Settings > MoCA Module
- 4.11.6 System/Module Settings > DOCSIS Module
- 4.11.7 System/Module Settings > CSM Module
- 4.11.8 System/Module Settings > MoCA-RF Module
- 4.11.9 System/Module Settings > Wi-Fi
- 4.12 Taskforce
- 4.13 Signature Capture
- 4.14 Language Selection
- 4.15 Help and Support
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Info
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 Packet Loss Test
- 5.7 Throughput
- 5.8 Speedtest
- 5.9 IP Video testing
- 5.9.1 Video QoS (Quality of Service)
- 5.9.2 Change Channel
- 5.9.3 Channel Guide Settings
- 6: Specifications
Tech-X Flex
®
(P5) Verizon Base Unit User Guide Rev B PRELIMINARY 3/20/2014
4-5
Intro
Wi-Fi
10/100
System
IP/Video
Specs
4.1.3 Record Manager > Signature Cap Files
Reserved for future use.
4.1.4 Record Manager > Screen Capture Files
This area allows you to preview and/or delete screen capture files currently stored in the Record
Manager (see Capturing a screen image (screenshot) on page 1-17). To transfer files from the unit, you
must use a USB device (see Record Manager > Upload Files on page 4-5).
4.1.5 Record Manager > Upload Files
This function allows you to transfer record files from the unit to a remote computer, using one of the
following:
• FTP - Not permitted on Verizon devices. Other than automatic uploads, all transfers from the unit
must use a USB device.
• USB - Using the physical USB port on the unit, allows the files to be transferred to a USB storage
device such as a removable flash drive, then transferred from that device to a computer.
NOTE: Do not plug the unit directly into a computer.
At the bottom of the screen, the Start button initiates the transfer. The following table describes the
parameters in the screen:
Table 4-2 Record Manager > Upload Files parameters
4.1.6 Record Manager > Inventory Upload Verizon
This function automatically generates a result file with user and inventory information only, then
automatically uploads it. An active Admin Port is required (see Admin Port on page 4-6). Note the
following:
Tab Description
Files tab Used to select the specific files that should be transferred and whether they should be
deleted from the unit following a successful transfer. Note that the list in this area
includes both test result files and screen capture files, as applicable.