User Manual
Table Of Contents
- 1: Introduction/Overview
- 1.1 Documentation notes
- 1.2 Important safety note
- 1.3 Product introduction
- 1.4 General product handling and operation
- 1.4.1 Protection from water and dust ingress
- 1.4.2 Powering on/off and sleep mode
- 1.4.3 Attaching, detaching, and handling modules
- 1.4.4 Attaching the strap
- 1.4.5 About the touchscreen display
- 1.4.6 Selecting the active interface
- 1.4.7 Running a function or test
- 1.4.8 Repeating a function or test
- 1.4.9 Screen title bar buttons/icons
- 1.4.10 Capturing a screen image (screenshot)
- 1.4.11 Stopping a test
- 1.4.12 Saving results
- 1.4.13 Maximum test duration for continuous tests
- 1.4.14 Interpreting results
- 1.4.15 Important MoCA module compatibility note
- 1.5 Remote control of the unit
- 1.6 Licensed feature details
- 1.7 Maintenance
- 1.8 FTP information
- 1.9 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100/1G Testing Menu
- 4: System Menu
- 4.1 Record Manager
- 4.2 Admin Port
- 4.3 Set Date and Time
- 4.4 Sync with PC
- 4.5 Version Info
- 4.6 Battery Status
- 4.7 Download IPTV Channel Guide
- 4.8 Cal Touchscreen
- 4.9 Licensed Options
- 4.10 Update Firmware
- 4.11 System/Module Settings
- 4.11.1 System/Module Settings > Base Unit
- 4.11.2 System/Module Settings > RF Video Module
- 4.11.3 System/Module Settings > ADSL/VDSL2 Module
- 4.11.4 System/Module Settings > Combined Module Default
- 4.11.5 System/Module Settings > MoCA Module
- 4.11.6 System/Module Settings > DOCSIS Module
- 4.11.7 System/Module Settings > CSM Module
- 4.11.8 System/Module Settings > MoCA-RF Module
- 4.11.9 System/Module Settings > Wi-Fi
- 4.12 Taskforce
- 4.13 Signature Capture
- 4.14 Language Selection
- 4.15 Help and Support
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Info
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 Packet Loss Test
- 5.7 Throughput
- 5.8 Speedtest
- 5.9 IP Video testing
- 5.9.1 Video QoS (Quality of Service)
- 5.9.2 Change Channel
- 5.9.3 Channel Guide Settings
- 6: Specifications
Tech-X Flex
®
(P5) Verizon Base Unit User Guide Rev B PRELIMINARY 3/20/2014
2-3
Intro
Wi-Fi
10/100
System
IP/Video
Specs
2.3.2 Wi-Fi testing diagram
The following diagram shows a typical setup for Wi-Fi testing.
Figure 2-2 Typical Wi-Fi testing diagram
2.3.3 If you cannot connect (troubleshooting tips)
If you are in range of a wireless access point but cannot connect, verify the following:
• If entering all information manually, you have properly identified the network. Because this is an error-
prone process, it is recommended that you use the auto-scan feature to find the network and
prepopulate many of the parameters (see Wi-Fi Setup > Scan on page 2-4.)
• The network is not an “ad hoc” network, which the unit does not support within the normal Wi-Fi
menu tools.
• You have identified the proper security protocol in use and have the necessary information for
connection. If the network uses WEP or WPA-PSK, you must have the required authentication
information. If it uses a different protocol that the unit does not support, such as WPA-EAP or MAC
address restrictions, you will not be able to connect.
2.4 Wi-Fi Setup
The Wi-Fi Setup - 802.11bgn (802.11b, g, and n) and Wi-Fi Setup - 802.11ac (802.11ac) menus contain
all the functions associated with finding and connecting to Wi-Fi networks, including:
Ping, traceroute, web browsing
Provider
network/ISP
Wireless
router
Home
computer
Ping