User Manual
Table Of Contents
- 1: Introduction/Overview
- 1.1 Documentation notes
- 1.2 Important safety note
- 1.3 Product introduction
- 1.4 General product handling and operation
- 1.4.1 Protection from water and dust ingress
- 1.4.2 Powering on/off and sleep mode
- 1.4.3 Attaching, detaching, and handling modules
- 1.4.4 Attaching the strap
- 1.4.5 About the touchscreen display
- 1.4.6 Selecting the active interface
- 1.4.7 Running a function or test
- 1.4.8 Repeating a function or test
- 1.4.9 Screen title bar buttons/icons
- 1.4.10 Capturing a screen image (screenshot)
- 1.4.11 Stopping a test
- 1.4.12 Saving results
- 1.4.13 Maximum test duration for continuous tests
- 1.4.14 Interpreting results
- 1.4.15 Important MoCA module compatibility note
- 1.5 Remote control of the unit
- 1.6 Licensed feature details
- 1.7 Maintenance
- 1.8 FTP information
- 1.9 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100/1G Testing Menu
- 4: System Menu
- 4.1 Record Manager
- 4.2 Admin Port
- 4.3 Set Date and Time
- 4.4 Sync with PC
- 4.5 Version Info
- 4.6 Battery Status
- 4.7 Download IPTV Channel Guide
- 4.8 Cal Touchscreen
- 4.9 Licensed Options
- 4.10 Update Firmware
- 4.11 System/Module Settings
- 4.11.1 System/Module Settings > Base Unit
- 4.11.2 System/Module Settings > RF Video Module
- 4.11.3 System/Module Settings > ADSL/VDSL2 Module
- 4.11.4 System/Module Settings > Combined Module Default
- 4.11.5 System/Module Settings > MoCA Module
- 4.11.6 System/Module Settings > DOCSIS Module
- 4.11.7 System/Module Settings > CSM Module
- 4.11.8 System/Module Settings > MoCA-RF Module
- 4.11.9 System/Module Settings > Wi-Fi
- 4.12 Taskforce
- 4.13 Signature Capture
- 4.14 Language Selection
- 4.15 Help and Support
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Info
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 Packet Loss Test
- 5.7 Throughput
- 5.8 Speedtest
- 5.9 IP Video testing
- 5.9.1 Video QoS (Quality of Service)
- 5.9.2 Change Channel
- 5.9.3 Channel Guide Settings
- 6: Specifications
Verizon Base Unit User Guide Rev B PRELIMINARY 3/20/2014 Tech-X Flex
®
(P5)
1-34
Intro
Wi-Fi
10/100
System
IP/Video
Specs
Figure 1-22 Remote control over an internet connection
This type of remote control allows access to nearly all test and management functions on the unit unless
you connect the unit over a Wi-Fi Admin Port, in which case all functions within the Wi-Fi menu (F2) will
be unavailable. To set it up:
1. At the subscriber site, if you plan to use a 10/100/1G Admin Port, connect the unit to the router with
a physical 10/100 (Ethernet) cable.
2. On the unit, set up a Wi-Fi Admin Port or a 10/100/1G Admin Port port (respectively) with
connectivity to the LAN, in a standard manner. For more information, see Admin Port on page 4-6.
3. Select System > Admin Port > WAN Remote Control > Enable WAN Remote Control. Note that
this step configures the router, in order to establish a VNC traffic path to the unit.
4. In the Enable WAN Remote Control results, make note of the following information which will be
required for the remote VNC client user:
• External IP Address - The address assigned to the WAN interface
• External VNC Port - The port that incoming VNC traffic must use
-or-
-or-
VNC
client
LAN
port
WAN
port
Internet
BHR
Wi-Fi
10/100
Admin Port
Ethernet
Wi-Fi
Admin Port
-or-