User Manual
Table Of Contents
- 1: Introduction/Overview
- 1.1 Documentation notes
- 1.2 Important safety note
- 1.3 Product introduction
- 1.4 General product handling and operation
- 1.4.1 Protection from water and dust ingress
- 1.4.2 Powering on/off and sleep mode
- 1.4.3 Attaching, detaching, and handling modules
- 1.4.4 Attaching the strap
- 1.4.5 About the touchscreen display
- 1.4.6 Selecting the active interface
- 1.4.7 Running a function or test
- 1.4.8 Repeating a function or test
- 1.4.9 Screen title bar buttons/icons
- 1.4.10 Capturing a screen image (screenshot)
- 1.4.11 Stopping a test
- 1.4.12 Saving results
- 1.4.13 Maximum test duration for continuous tests
- 1.4.14 Interpreting results
- 1.4.15 Important MoCA module compatibility note
- 1.5 Remote control of the unit
- 1.6 Licensed feature details
- 1.7 Maintenance
- 1.8 FTP information
- 1.9 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100/1G Testing Menu
- 4: System Menu
- 4.1 Record Manager
- 4.2 Admin Port
- 4.3 Set Date and Time
- 4.4 Sync with PC
- 4.5 Version Info
- 4.6 Battery Status
- 4.7 Download IPTV Channel Guide
- 4.8 Cal Touchscreen
- 4.9 Licensed Options
- 4.10 Update Firmware
- 4.11 System/Module Settings
- 4.11.1 System/Module Settings > Base Unit
- 4.11.2 System/Module Settings > RF Video Module
- 4.11.3 System/Module Settings > ADSL/VDSL2 Module
- 4.11.4 System/Module Settings > Combined Module Default
- 4.11.5 System/Module Settings > MoCA Module
- 4.11.6 System/Module Settings > DOCSIS Module
- 4.11.7 System/Module Settings > CSM Module
- 4.11.8 System/Module Settings > MoCA-RF Module
- 4.11.9 System/Module Settings > Wi-Fi
- 4.12 Taskforce
- 4.13 Signature Capture
- 4.14 Language Selection
- 4.15 Help and Support
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Info
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 Packet Loss Test
- 5.7 Throughput
- 5.8 Speedtest
- 5.9 IP Video testing
- 5.9.1 Video QoS (Quality of Service)
- 5.9.2 Change Channel
- 5.9.3 Channel Guide Settings
- 6: Specifications
Verizon Base Unit User Guide Rev B PRELIMINARY 3/20/2014 Tech-X Flex
®
(P5)
6-2
Intro
Wi-Fi
10/100
System
IP/Video
Specs
Table 6-2 Power specifications
Table 6-3 Environmental requirements
6.2 Wi-Fi specifications
Table 6-4 Wi-Fi specifications
6.3 FCC compliance statements
• RF exposure - This equipment complies with the FCC RF radiation exposure limits set forth for an
uncontrolled environment. For wireless 802.11b/g/n operation, the highest specific absorption rate
(SAR) value is 0.787 W/kg. Special considerations for 802.11ac transmission apply - see Important
wireless 802.11ac note on page 2-2.
• Co-location - This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
AC operations Requires external AC adapter/charger. Adapter will charge battery while
unit is in use. Adapter specifications:
• Input - 100 to 240 VAC, 50/60 Hz, 0.8 amps
• Output - 12 VDC, 2.0 amps
Battery type LiON rechargeable, replacements available from Spirent
Battery life 3-10 hours, depending on use and type of module attached
Battery recharge time 3-4 hours
Maximum power usage 24 watts
Maximum heat
dissipation
9 watts
Operating temperature -0.4 to 131°F (-18 to 55°C)
Storage temperature -4 to 158°F (-20 to 70°C)
Humidity tolerance 5 to 85% RH at +104°F (40°C)
Drop IEC 60068, 68-2-32
Protocol support 802.11b/g/n/ac with WEP, WPA, or WPA2 security
Antennas Two internal 802.11b/g/n antennas and three internal 802.11ac antennas