User's Manual
Table Of Contents
- 1: Introduction
- 1.1 Documentation notes
- 1.2 Product introduction
- 1.3 General product handling and operation
- 1.3.1 Powering on/off and sleep mode
- 1.3.2 Attaching, detaching, and handling modules
- 1.3.3 Attaching the Wi-Fi antenna
- 1.3.4 Attaching the strap
- 1.3.5 About the touchscreen display
- 1.3.6 Selecting the active interface
- 1.3.7 Starting a function or test
- 1.3.8 Stopping a test
- 1.3.9 Saving results
- 1.3.10 Interpreting results
- 1.4 Maintenance
- 1.5 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100 Testing Menu
- 4: System Menu
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Information
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 IP Video testing
- 6: Specifications
Base Unit User Guide Issue 1 Tech-X Flex™
6-2 6: Specifications
Intro
Wi-Fi
10/100
System
IP/Video
Specs
6.2 Wi-Fi specifications
Table 6-2 Power specifications
AC operations External AC adaptor/charger
NOTE: Adaptor will charge battery while unit is in use.
Battery type LiON rechargeable
Battery life 3-10 hours, depending on use
Battery recharge time 3-4 hours
Maximum power usage 24 watts
Maximum heat
dissipation
9 watts
Table 6-3 Environmental requirements
Operating temperature 41 to 104°F (5 to 40°C)
Storage temperature -4 to 158°F (-20 to 70°C)
Humidity tolerance 5 to 85% RH at +104°F (40°C)
Drop IEC 60068, 68-2-32
Table 6-4 Wi-Fi specifications
Protocol support 802.11b, with WEP security
Antenna Detachable, hinged 3.25 in (8.3 cm) antenna