User's Manual
Table Of Contents
- 1: Introduction
- 1.1 Documentation notes
- 1.2 Product introduction
- 1.3 General product handling and operation
- 1.3.1 Powering on/off and sleep mode
- 1.3.2 Attaching, detaching, and handling modules
- 1.3.3 Attaching the Wi-Fi antenna
- 1.3.4 Attaching the strap
- 1.3.5 About the touchscreen display
- 1.3.6 Selecting the active interface
- 1.3.7 Starting a function or test
- 1.3.8 Stopping a test
- 1.3.9 Saving results
- 1.3.10 Interpreting results
- 1.4 Maintenance
- 1.5 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100 Testing Menu
- 4: System Menu
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Information
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 IP Video testing
- 6: Specifications
Tech-X Flex™ Base Unit User Guide Issue 1
3: 10/100 Testing Menu 3-3
Intro
Wi-Fi
10/100
System
IP/Video
Specs
3.4 IP Network Setup
IP Network Setup allows you to assign IP routing information to the unit in order to perform IP-based
testing. This function operates similarly to other interfaces; however, note that when launched from the
10/100 menu, the assigned IP information applies to the 10/100 interface/connection only.
For more information on IP Network Setup parameters and results, see IP Network Setup on page 5-1.
NOTE: The unit must be connected to a suitable access device before attempting IP Network setup
(see 10/100 testing diagram on page 3-2).
3.5 Ping
Ping testing over the 10/100 interface is similar to other interfaces. For more information, see Ping on
page 5-4.
3.6 Traceroute
Traceroute testing over the 10/100 interface is similar to other interfaces. For more information, see
Traceroute on page 5-5.
3.7 Web Browser
NOTE: The web browser is a purchasable option. Please contact Spirent for more information.
Use of the web browser over the 10/100 interface is similar to other interfaces. For more information, see
Web Browser on page 5-6.
3.8 IP Video Tests
NOTE: Video testing is a purchasable option. Please contact Spirent for more information.
Active IP video testing on the 10/100 interface is similar to other interfaces. For more information, see IP
Video testing on page 5-7.