User's Manual
Table Of Contents
- 1: Introduction
- 1.1 Documentation notes
- 1.2 Product introduction
- 1.3 General product handling and operation
- 1.3.1 Powering on/off and sleep mode
- 1.3.2 Attaching, detaching, and handling modules
- 1.3.3 Attaching the Wi-Fi antenna
- 1.3.4 Attaching the strap
- 1.3.5 About the touchscreen display
- 1.3.6 Selecting the active interface
- 1.3.7 Starting a function or test
- 1.3.8 Stopping a test
- 1.3.9 Saving results
- 1.3.10 Interpreting results
- 1.4 Maintenance
- 1.5 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100 Testing Menu
- 4: System Menu
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Information
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 IP Video testing
- 6: Specifications
Tech-X Flex™ Base Unit User Guide Issue 1
3: 10/100 Testing Menu 3-1
3: 10/100 Testing Menu
With the 10/100 testing menu, the unit is able to join a 10/100 Ethernet link and perform the following
functions and tests:
• IP address retrieval/assignment (See IP Network Setup on page 5-1)
• IP ping (See Ping on page 5-4)
• Traceroute (See Traceroute on page 5-5)
• Internet web page request (See Web Browser on page 5-6)
• IP video testing (See IP Video testing on page 5-7)
• Ethernet bridging and passive testing (See Passive testing on page 3-4)
Figure 3-1 10/100 main menu
NOTE: On the unit, you can use either 10/100 port for single-ended tests such as ping and traceroute.
For more information, see About the 10/100 ports and connections on page 3-2.