User's Manual
Table Of Contents
- 1: Introduction
- 1.1 Documentation notes
- 1.2 Product introduction
- 1.3 General product handling and operation
- 1.3.1 Powering on/off and sleep mode
- 1.3.2 Attaching, detaching, and handling modules
- 1.3.3 Attaching the Wi-Fi antenna
- 1.3.4 Attaching the strap
- 1.3.5 About the touchscreen display
- 1.3.6 Selecting the active interface
- 1.3.7 Starting a function or test
- 1.3.8 Stopping a test
- 1.3.9 Saving results
- 1.3.10 Interpreting results
- 1.4 Maintenance
- 1.5 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100 Testing Menu
- 4: System Menu
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Information
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 IP Video testing
- 6: Specifications
Tech-X Flex™ Base Unit User Guide Issue 1
1: Introduction 1-17
Intro
Wi-Fi
10/100
System
IP/Video
Specs
Figure 1-10 Removing the battery pack
3. Using the two screws at the base of the battery pack unit, remove the old battery from the plastic
holder and replace with the new battery,
4. Carefully reinstall the battery pack and screws.
NOTE: Do not overtighten the screws, which could cause the battery pack cover to crack.
1.5 Technical support
If you need product assistance or want to report problems with the product or the documentation, please
contact us.
Client Services
Spirent Communications
20324 Seneca Meadows Parkway
Germantown, MD 20876
USA
Phone: +1 301.444.2400
or +1 800.321.0780 (USA)
Fax: +1 301.444.1010