User's Manual
Table Of Contents
- 1: Introduction
- 1.1 Documentation notes
- 1.2 Product introduction
- 1.3 General product handling and operation
- 1.3.1 Powering on/off and sleep mode
- 1.3.2 Attaching, detaching, and handling modules
- 1.3.3 Attaching the Wi-Fi antenna
- 1.3.4 Attaching the strap
- 1.3.5 About the touchscreen display
- 1.3.6 Selecting the active interface
- 1.3.7 Starting a function or test
- 1.3.8 Stopping a test
- 1.3.9 Saving results
- 1.3.10 Interpreting results
- 1.4 Maintenance
- 1.5 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100 Testing Menu
- 4: System Menu
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Information
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 IP Video testing
- 6: Specifications
Tech-X Flex™ Base Unit User Guide Issue 1
1: Introduction 1-7
Intro
Wi-Fi
10/100
System
IP/Video
Specs
Table 1-2 LED indicator description
Indicator Function
SYNC Indicates the status of the link over the active interface. For example, when using the Wi-
Fi interface, the LED indicates the status of the Wi-Fi link. The general behavior is as
follows:
• Solid green - The unit is properly linked and/or synchronized with a comparable far-
end device. For the 10/100 interface, the LED is solid green any time the interface is
configured with IP information, but does not necessarily indicate that the information is
valid and routable.
• Red - The unit is attempting to configure the active interface and/or link with a far-end
device.
DATA Flashes when sending or receiving data over the active interface. For example, when
using the 10/100 interface, the LED flashes when an Ethernet frame is sent or received.
ERRORS Indicates errors at the data link level on the active data stream. For example, on the
10/100 interface, the LED may indicate Ethernet frame CRC errors.
CHARGE Indicates power source and charging status, as follows:
• Solid red - Unit is connected to an external power source and the battery is charging
• Solid green - Unit is connected to an external power source and the battery is nearly
or fully charged
• Off - Unit is not connect to external power (unit on or off) and/or the unit has no battery
installed
Note that the unit includes a system feature for reporting detailed information about
battery status. For more information, see Battery Status on page 4-4.