User's Manual

ManualsBrandsSpirent Communications ManualsElectronicsNomad UX is a table top HW device for Voice Quality and Call Performance verification of up to 6 mobile devices via both analog interfaces and Bluetooth radios.

1

2

3

4

5

6

Figure 2 Back Panel

1.2.2.1. LED indicators

Indicator

Function

L1, L2, L3, L4, L5, L6

Indicates the status of the link over the active

interface for the given channel. For example,

when utilizing the Bluetooth interface, the LED

indicates the status of the Bluetooth link. The

general behavior is as follows:

 Dark – Channel is disabled

 Green – Channel is enabled for

Narrowband Analog

 White – Channel is enabled for Wideband

Analog

 Cyan (Flashing) – Bluetooth initialization

 Cyan (Solid) – Bluetooth initialized

 Blue (Flashing) – Bluetooth Pairing “On”

 Blue (Solid) – Bluetooth is Paired

 Yellow (Flashing) – Outgoing call setup

 Yellow (Solid) – Outgoing call in progress

 Magenta (Flashing) – Incoming call setup

 Magenta (Solid) – Incoming call in

progress

 Red - Overdrive

Pwr

Light located on top of unit in the Spirent Logo.

When lit, indicates that power is applied to the

unit.