User's Manual Part 2

Nomad User’s Manual Chapter 9 – Voice Quality Configuration Options

 End the test when desired.

Assuming all four channels are available for testing, up to four Remote Unit test calls may be placed

simultaneously. Spirent Communications recommends aligning calling handsets on the local unit

with the receiving handsets on the remote unit. For example, Handset 1 on the local unit should

call Handset 1 on the remote unit; Handset 2 on the local unit should call Handset 2 on the remote

unit, etc.

To merge the local and remote data into a single file for report generation:

 Obtain the remotely collected log file via email or other file transfer method.

 Because Nomad will have access to only the locally collected data (not the data collected

remotely), the locally collected file will appear on the Data → Incomplete tab after

collection is stopped.

 Use the Import Logging Session button to find and open the remotely collected log file.

 On the Data → Incomplete tab, select both the locally collected file and the remotely

collected file.

 Click the Merge Selected button to merge the two files into one file that will appear on the

Data → Complete tab and which can be used to generate a formatted output report.

In the formatted output report generated with Remote Unit test data, find results for locally

received audio in the Channel 1 – DL area. Find results for remotely received audio in the Channel

1 – UL area.