User's Manual Part 1

Nomad User’s Manual Chapter 6 – Initiating a Test
Copyright © Spirent Communications, Inc. 2013 59
Figure 6-2 - Bluetooth Module Device Control
6.3 Placing Calls on Mobile Handsets
At the conclusion of the Start Logging Wizard, Nomad will automatically place test calls for:
 All devices running Call Performance tasks.
 Devices running Voice Quality tasks which are connected via Bluetooth and which have
been configured for auto-dial on the Settings → Voice Quality tab (see Section 4.4.3).
All other calls must be manually placed to the Audio Server. To place each call:
 Dial the handset using the Audio Server phone numbers supplied with Nomad.
 Following the voice prompt, enter the Access PIN (if applicable).
 Verify from the voice prompt that the session has started.
 Connect the handset to the licensed channel audio cable (Channel 1, Channel 2, etc.) as
appropriate.