User's Manual Part 1

Nomad User’s Manual Chapter 5 – Defining a Test

 Two methods are available to apply the task to any specific channel or All Channels:

1. Use the Apply selected task to: drop-down at the bottom of the dialog. Then click

OK to confirm the selection.

2. Right-click on the selected task and select Apply To and the channel number. The

Configured Tasks dialog will close automatically.

Figure 5-26 - Applying the Selected Task

A Configured Task may be exported as an XML file to share with other users. To export a

Configured Task, click the Export Selected Tasks button in the Configured Tasks dialog. The

saved XML may be imported into Nomad using the Import Tasks button in the Configured Tasks

dialog.

A task may be removed from a channel using the Remove Current Task button on the Test Setup

tab.