User's Manual Part 1

Nomad User’s Manual Chapter 5 – Defining a Test

5.3.1 Working with Configured Tasks

A Configured Task saves all of the settings for the currently selected task. A Configured Task may

then be applied to any test channel in the current or future tests. This option is useful for

replicating a single task across multiple test channels.

To save a Configured Task:

 Configure all task settings as desired.

 Select the Save As Configured Task option on the Test Setup tab.

 Name the Configured Task and then Save.

Figure 5-24 - Save Configured Task Dialog

To apply a Configured Task to a test channel:

 Click the Load Configured Task button on the Test Setup tab.

 Click to select any Configured Task shown.

Figure 5-25 - Select a Task from the List