User's Manual Part 1

Nomad User’s Manual Chapter 5 – Defining a Test
Copyright © Spirent Communications, Inc. 2013 40
Figure 5-10 – Phone Number Settings Populated by the Connection Assistant
 Reference file
o This setting controls the reference file to be used for this voice quality task. This is
an advanced setting which, when changed from the default value, will not work with
any of Spirent’s default call servers, only when a corresponding ‘base’ task hase
been setup up on a second Nomad unit.
 Session Ends – In this area, select the method for ending the test session:
o Manually – The user ends the test session by pressing the Stop button.
o After X Cycles – The session ends after the system has run through X sourcing and
recording cycles.
Figure 5-11 – Reference file Settings
5.2.2.1 IMS Client Settings
When selecting IMS Client as the Uplink Device, the options for configuring the IMS Client will
appear along with some of the normal session options described above.