User's Manual Part 1

Nomad User’s Manual Chapter 5 – Defining a Test
Copyright © Spirent Communications, Inc. 2013 39
Figure 5-8 – Edit Audio Server Settings Dialog
o Dial the Audio Server using the handset to be connected to this channel. The
handset does not need to be connected at this time.
o All active calls to the Audio Server will be represented in the Connection Assistant
drop-down window using the {4 Digit DNIS}-{10 Digit ANI} convention:
 {4 Digit DNIS} –The last four digits of the Audio Server phone number called
by the mobile.
 {10 Digit ANI} – The phone number of the mobile being tested.
o If the test handset does not appear in the list, use the Refresh button to update. It
may take up to one minute for the handset to appear.
o Use the drop-down to select the correct number combination from the list.
o Click OK.
Figure 5-9 - Connection Assistant
o The Number to call and Number calling from fields will be populated based on
your selection, removing the risk of manually entering this information incorrectly.
o Note: Spirent strongly recommends that international users outside of North
America use the Connection Assistant to ensure that phone numbers are entered in
the correct format.