User's Manual Part 1

Nomad User’s Manual Chapter 4 – Specifying Nomad Settings
Copyright © Spirent Communications, Inc. 2013 25
4.3.5 Call Result Warnings
Select whether or not to Enable call result warnings and to Enable audible alarms for these
warnings. Warnings will occur when the consecutive number of events exceeds the user-defined
threshold for each of these event types:
Call Outcome
Definition
Failed Attempt
 A Mobile Originated Call was placed and an outgoing call was
established followed by the phone’s return to the call
placement state.
No Service
 There was no service available when the call was attempted.
Access Timeout
 Mobile Originated Call – A call was placed but no state change
occurred before the Access Timeout time.
 Mobile Terminated Call – The connection did not take place
before the Access Time.
Dropped Call
 The call was ended before the expected duration had elapsed.
Physical Link Error
 The Bluetooth connection between the test mobile and the
Nomad hardware unit was not active at the time a call was
supposed to occur.
Logical Device Error
 The test mobile failed to respond properly to a command
issued by Nomad via the Bluetooth connection.
BC Error (BlueCore Error)
 The Bluetooth module was not in a nominal state at the time a
call was supposed to occur.
Figure 4-9 - Call Result Warnings Area