User's Manual Part 2

Tech-X Flex
®
(NG2) Tech-X Flex User Guide - Firmware v06.50
7-25
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
an evaluation of FAIL. If any stage has produced a marginal result but no stages failed, the network
receives an evaluation of MARGINAL.
In the Log tab, stages are marked using colored icons according to thresholds that were evaluated
during the process. A single failed evaluation causes the respective stage to be marked as such. In the
absence of any failures, a single marginal evaluation causes the respective stage to be marked as such.
Note that a failure does not mean that the testing process could not complete, only that a threshold was
violated. For more information on thresholds and coloring, see View/Edit Thresholds on page 7-28.
NOTE: If a stage is marked as marginal or failing, you can press the respective area on the
touchscreen in the Log tab to jump to those respective results.
Figure 7-17 MoCA Quick Test results - Log tab
In addition to a log of these stages, the test also produces a set of tabs that show much of the actual data
that was measured and analyzed. These tabs have some similarity to the pages produced when
manually retrieving network statistics, except that the MoCA Quick Test displays non-updating
snapshots of the data retrieved during the test only. For any node that produced a metric violation, a
separate tab is also produced showing the applicable details on that specific node:
Preliminary issue - Limited distribution only!