User's Manual Part 2
Tech-X Flex
®
(NG2) Tech-X Flex User Guide - Firmware v06.50
7-23
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
pages are identical to their single-ended testing counterparts, except that you previously chose which
side (A or B) to test. For more information, see MoCA Network Statistics on page 7-9.
7.4.5 About MoCA and 10/100/1G interface bridging (ECB)
Because the MoCA and 10/100/1G interfaces are logically connected by a common Ethernet switch, the
unit can act as a bridge between MoCA and Cat-5 Ethernet, commonly called an ECB (Ethernet/coax
bridge). For example, the unit can allow a computer to join the MoCA-based LAN or WAN through its
10/100/1G interface:
Figure 7-16 Bridging a computer to the network
ECB functionality must be specifically enabled when you join a MoCA network. Currently, the unit does
not provide any test functions directly related to this bridge setup, but the use of a laptop on the network
may be useful for isolating problems with Ethernet bridging devices and perhaps advanced functions
using the computer itself.
7.5 MoCA Quick Test
(Select MoCA-RF > MoCA > MoCA Quick Test)
-or-
(MoCA-RF > MoCA > Join MoCA Network > MoCA Quick Test)
Coax
10/100/1G
interface
Ethernet
IP traffic
Preliminary issue - Limited distribution only!