User's Manual Part 2

Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex

(NG2)

7-10

Intro

Overview

Wi-Fi

Ethernet

System

IP/Video

MoCA

Specs

• Bandwidth page (appears first) - Provides details on the available bandwidth between nodes on the

network (see Bandwidth page (MoCA Network Statistics) on page 7-10)

• MoCA Statistics page - Provides general information about the network, including details on

Ethernet traffic (see MoCA Statistics page (MoCA Network Statistics) on page 7-11)

• Node Stats page - Provides details on the links to every other node on the network, including bit-

loading profiles (see Node Stats page (MoCA Network Statistics) on page 7-13)

NOTE: When testing on a coaxial network that carries more than one MoCA network (such as a LAN

and a WAN), it is very important that you have synchronized with the correct network.

Otherwise, the statistics that you retrieve may be misleading. For example, WAN statistics will

not show the same nodes as the LAN, because certain nodes only belong to one or the other

despite the physical interconnectivity. For more information, see Example physical MoCA

network on page 7-32.

Bandwidth page (MoCA Network Statistics)

The Bandwidth page provides a table of the bandwidths between all nodes on the network, including the

unit. The table has a row and a column for each node in the network, with the “To” direction across the

top. For example, consider the following table:

Figure 7-7 Bandwidth page

This table shows that the bandwidth from node 3 to node 0 is 241 Mbps, while the bandwidth from node

0 to node 3 is 204 Mbps, and so forth. While reviewing a Bandwidth page table, note the following:

Preliminary issue - Limited distribution only!