User's Manual Part 2

Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex
®
(NG2)
7-8
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
NOTE: You must use the left port (port “A”) for all single-ended testing.
Using a generalization of the example shown in Figure 7-21 on page 7-33, the leftmost configuration
could effectively place the unit as follows:
Figure 7-5 Emulating an STB - Network diagram
Single-ended testing setup for router troubleshooting
When connecting at the router location, common options for connection include:
Coax/
MoCA
Coax splitter
MoCA STB
MoCA router
MoCA to
Ethernet
Cat 5 /
Ethernet
Preliminary issue - Limited distribution only!