User's Manual Part 2

Tech-X Flex
®
(NG2) Tech-X Flex User Guide - Firmware v06.50
7-1
7: MoCA/RF - MoCA Testing
This section describes the MoCA-specific functions of the combined MoCA/RF module. The unit
supports synchronization with MoCA standards 1.0, 1.1, and 2.0, with full backwards-compatibility
behaviors as dictated by the respective standards. For a brief overview, see Overview of testing
capabilities and setup on page 7-2.
For more information on specific functions, see:
• Join MoCA Network (Single-ended testing details) on page 7-4
• Join MoCA Network In-Line (Bridging and passive testing) on page 7-19
• MoCA Quick Test on page 7-23
Figure 7-1 MoCA main testing menu
7.1 Important notes on handling the module
See Handling the MoCA/RF module on page 2-30.
Preliminary issue - Limited distribution only!