User's Manual Part 2

Tech-X Flex
®
(NG2) Tech-X Flex User Guide - Firmware v06.50
6-31
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
Results - Video QoS (VQM test)
Test results are presented in three different screens, each of which has two different pages. Use the
appropriate function key to switch between screens. Note the following:
• All quantitative measurements apply to the reporting period only. No measurements are cumulative.
• Unless indicated otherwise, any reference to “packets” means MPEG packets, not IP packets.
Result Description
IP Address
Port
IP address and port of the media stream, specified at test launch.
Receive Rate Speed of frames received, in kbits/sec. For VQM testing, this is the receive rate
of the video or audio stream, as applicable. For MDI testing, this is the receive
rate of the PCR stream.
MDI
Media Loss Rate
Delay Factor (Avg)
Delay Factor (Max)
Delay Factor (Min)
See MDI measurement overview on page 6-48.
NOTE: The MDI result is colored green or red according to the fixed
pass/fail thresholds shown in the Plot tab.
Preliminary issue - Limited distribution only!