User's Manual Part 2

Tech-X Flex
®
(NG2) Tech-X Flex User Guide - Firmware v06.50
6-21
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
Figure 6-14 All Devices Packet Loss - Results (Continuous test)
6.10.3 Special MoCA BHR considerations - All Devices Packet Loss
On a MoCA network, the test can run on a LAN with or without an active router (BHR). To support both
scenarios, you must first select one of the following options when the test is launched with the MoCA
interface active:
Figure 6-15 All Devices Packet Loss - MoCA test mode prompt
• Replacing BHR - With this mode, the unit assumes that no router is present and serves as a basic
DHCP server. During the host detection stage, any active devices should receive a short-lease IP
address, suitable for completing the remainder of testing.
If this option is chosen, the unit produces a subsequent prompt for the BHR IP Address and the BHR
Mask. These settings allow the unit to simulate the router and distribute IP addresses that will be
routable on the normal BHR-hosted LAN. If you specify values that do not represent the normal LAN,
Preliminary issue - Limited distribution only!