User's Manual Part 2

Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex
®
(NG2)
6-18
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
Table 6-12 Speedtest setup parameters
Figure 6-11 Speedtest - Setup
6.9.2 Results - Speedtest
NOTE: While the test is actively sending traffic, the screen presents a “collecting data” message and
does not update further until the traffic exchange is complete. It may take up to a minute to
complete this exchange, after which the final results are presented graphically.
The test produces a simple graphical display of the maximum speeds achieved for upload and download.
Measurement Description
Region General location of the target endpoint. The options in the list represent
designated endpoints that are specifically provided for this test. These locations,
along with the underlying IP addresses, are hardcoded with the unit firmware.
Normally, you should select the geographically closest location. For more
information on these locations, contact a local administrator. For more
information on augmenting this list, please contact Spirent.
Preliminary issue - Limited distribution only!