User's Manual Part 2

Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex
®
(NG2)
9-2
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
Table 9-2 Power specifications
Table 9-3 Environmental requirements
9.2 Wi-Fi functional area specifications
Table 9-4 Wi-Fi specifications
AC operations Requires external AC adapter/charger. Adapter will charge battery while
unit is in use. Adapter specifications:
• Input - 100 to 240 VAC, 50/60 Hz, 0.8 amps
• Output - 12 VDC, 2.0 amps
Battery type Lithium-ion rechargeable, replacements available from Spirent
Battery life 3-10 hours, depending on use and type of module attached
Battery recharge time 3-4 hours
Maximum power usage 24 watts
Maximum heat
dissipation
9 watts
Operating temperature -0.4 to 131°F (-18 to 55°C)
Storage temperature -4 to 158°F (-20 to 70°C)
Humidity tolerance 5 to 85% RH at +104°F (40°C)
Drop IEC 60068, 68-2-32
Protocol support 802.11b/g/n/ac with WEP, WPS, WPA, or WPA2 security.
Antennas • T5200 - Two internal 802.11b/g/n antennas and three internal 802.11ac
antennas.
• T5300 - Three internal antennas for all Wi-Fi testing (b/g/n/ac), one internal
antenna for Wi-Fi admin, and one internal antenna reserved for spectrum
testing.
Preliminary issue - Limited distribution only!